'The No.1 suppliers of professional tools & equipment
to the aerospace & engineering industry’
02380 455443
Print

Cherry Aerospace H800 Compact Universal Straight Pulling Head for the G800 riveter


24h.gif
Ask a question about this product

Product Description

 cherry h75

PDF Download 2

Cherry Aerospace H800 Compact Universal Straight Pulling Head for the G800 riveter

MOUNTING INSTRUCTIONS (see Fig 2)
 Depress the pressure release button of the riveter and make sure the piston is fully returned.
 Place the stem stop & spring inside of the riveter piston
 Thread and tighten the collet assembly onto the riveter piston
 Thread in the sleeve assy and lock it in by tightening the Jam Nut.

JAW ADJUSTMENT
The jaws have to be adjusted to allow front ejection of the spent stem
 Push the fastener all the way through the front nose piece.
 While sliding the stem back and forth inside the nose piece, thread
the sleeve assembly in until the stem is released.
 Lock the sleeve assembly in position by tightening the Jam Nut.

OPERATING INSTRUCTIONS
Prior to tool operation make sure that:
 Pulling Head is correctly mounted on the riveter and jaws are
properly adjusted
 A proper nose-piece in good working condition is used.

Reviews

There are yet no reviews for this product.

Find Us

Contact Us

HEAD OFFICE
Unit 8 Mitchell Point
Ensign Way Hamble Le Rice
Southampton Hampshire
SO31 4RF UK

Phone: 02380 455443
Fax: 02380 455081
Email: sales@aptoolsltd.co.uk
Company No. 4567854

Recent Tweets

Site Map

Copyright © 2015 AP Tools Ltd. All rights reserved. Website Design by Akira Studio Ltd